 |
Dual Connect DC-S200 and DC-S400 Speaker Cables are precious metal conductor stereo speaker cable sets that combine gold plated solid silver wires in a dual configuration (“Dual Connect”) within a thin tubing of PTFE (Teflon®) insulation to optimize linearity for audio frequency signals.
This design provides superior sonic performance and preserves the valuable quality unchanged for years due to very high resistance to moisture, heat, UV-light, air pollution and aggressive chemicals.
The capacitance between adjacent wires is very low.
These unique features make Dual Connect DC-S200 and DC-S400 Speaker Cables an excellent choice for the most demanding speaker applications for domestic and professional power audio signal distribution.
Dual Connect Speaker Cables are supplied in lengths of 2 meters (DC-S200) and 4 meters (DC-S400) fitted with gold plated copper spade terminals.
Dual Connect Speaker Cables are available in DIY Speaker Wire versions without terminals as DC-DIYspk200 (2 meters) and DC-DIYspk400 (4 meters).
|
|
|
|
|
Features
|
|
-
|
“Dual-Connect” design with gold plated solid silver conductors in dual configuration
|
|
-
|
High power transfer capacity: 5000 Watts into 4 ohms
|
|
-
|
Low conductor resistance with only 0.0033 ohm/meter
|
|
-
|
Low audio frequency attenuation of 0.03 dB/meter
|
|
-
|
Materials selected to ensure very high durability
|
|
-
|
All nonmagnetic materials with very linear performance
|
|
-
|
PTFE insulation with low dissipation factor of 0.0002
|
|
-
|
Gold plated conductors and spade terminals avoid performance degradation over time
|
|
|
|
|
|
|
Typical applications
|
|
-
|
Superior-sonic-performance speaker cable
|
|
-
|
Excellent for upgrading hi-fi cabinet speakers
|
|
-
|
Ideal for upgrading hi-fi car speaker systems
|
|
-
|
Power distribution for audio power supplies
|
|
-
|
Very high quality professional sound systems
|
|
-
|
Demanding automotive and marine applications
|
|
-
|
Cables resistant to heat, UV-light and chemicals
|
|
-
|
Reference speaker cable with very high durability
|
|
|
|
|
Fig. 1. Outline drawing and dimensions for DC-S200 and DC-S400 speaker cables
|
|
|
|
|
|
Fig. 2. Electrical circuit diagram for a stereo cable set (part no. DC-S200 or DC-S400).
|
|
|
|
|
|
|
|
Dimension
|
Value, mm
|
Value, inch.
|
|
A
|
1mm
|
0.04”
|
|
B
|
3.5mm
|
0.14”
|
|
C
|
25.5mm
|
1”
|
|
D
|
13mm
|
0.51”
|
|
E
|
6.5mm
|
0.26”
|
|
F
|
5.5mm
|
0.22”
|
|
|
|
|
|
|
|
Fig. 3. Outline drawing and dimensions for DC-S200 / DC-S400 spade connectors
|
|
|
Legal notice: Teflon® is a registered trade mark of DuPont Dow Elastomers
|
|
|
